Compelo Energy is using cookies

We use them to give you the best experience. If you continue using our website, we'll assume that you are happy to receive all cookies on this website.

ContinueLearn More
Close

Subsea Innovation Ltd - Innovative Subsea Engineering

Logo
ABOUT
Formed in 1985 by a team of experienced engineers and diving professionals Subsea Innovation is a company dedicated to delivering state of the art engineering products to the offshore Oil & Gas and Energy industry throughout the world.
Quick Contact Subsea Innovation



Subsea Innovation - About

Specialty
Upstream

Formed in 1985 by a team of experienced engineers and diving professionals Subsea Innovation is a company dedicated to delivering state of the art engineering products to the offshore Oil & Gas and Energy industry throughout the world.

State of the art engineering products to the offshore Oil & Gas and Energy industry

An impressive track record coupled with an underlying commitment to continuous improvement has seen Subsea Innovation gain world-class pedigree from a balance of hands on experience and a desire to provide innovative technologies. This is clearly demonstrated by the ongoing performance of Subsea Innovation products in the field.

Design & manufacture of highly sophisticated marine engineering solutions

Through its dedicated team of highly skilled Engineers, Designers and Technicians based in the North East of England Subsea Innovation continues to retain its status as a recognised world leader in the design and manufacture of highly sophisticated marine engineering solutions.

subsea subsea

The extensive product range can be split into the following categories:

  • Offshore Equipment Handling Systems
  • Pipeline Repair / Recovery Systems
  • Subsea Sealing Systems

In addition to product supply, Subsea Innovation Ltd provides supervision services to oversee the successful deployment and installation of its equipment. The company provides an after care service and can supply spare and replacement parts for the full range of products.

subsea

Contact

Subsea Innovation Ltd
Innovation House
Centurion Way
Darlington
DL3 0UP
Phone +44 1325 349050
E-mail: info@subsea.co.uk
URL: www.subsea.co.uk

Tether Management Systems

Subsea Innovations TMS are designed, constructed and tested according to DNV's Standard For Certification Of Lifting Appliances No 2.22 October 2008.

Two variations of TMS are currently available:TMS-PFTMS-SFAll systems are supplied with the ROV umbilical termination socket and an optional TMS hydraulic power unit can be provided for deck testing and hydraulic priming.

Subsea Sealing Solutions

Subsea Innovation design and manufacture a wide range of standard and bespoke pipeline sealing solutions to suit our clients specific requirements.

Sealing solutions using elastomeric seals can be provided for operating temperatures between -40 degC to +180 degC and for pressures from 0 to 500 bar.g. Higher temperatures can be accommodated using graphite seals.Seal activation methods can vary from an active design, incorporating a self-sealing principle, to mechanical or hydraulic methods.Seals can be fitted with ROV…

Stack Reinforcement Systems

This equipment provides long-term reinforcement to the subsea annular cavity in a flare stack.

The equipment is commissioned offshore by Subsea Innovations service engineers and is completely installed by ROV. It was successfully used to repair three flare stack legs off the coast of Egypt.

Pipeline Repair Systems

A world leader in the supply of split sleeve pipeline repair clamps, Subsea Innovation have supplied over 50 systems to major operators around the world. Our pipeline repair clamp provides a field proven solution for sealing subsea pipelines using split sleeve technology.

The complete service is provided, from design and production through to offshore installation.Three variations of the clamps are available:Diver Installed / Topside ClampsROV Installed ClampsStructural Repair Clamps

Pipeline Clamp Technology

A wide range of clamping systems have been designed specifically to suit clients individual project requirements. Clamp designs vary from split frictional clamps, for low axial loads, to modules fitted with the SIGrip™ Collet System for increased holding capability.

Clamping solutions can be fitted with seal assemblies, typically used on riser / umbilical hang-off systems. Pipeline Recovery Clamps can be installed subsea as an ROV installed clamp using hydraulic intervention or as a diver installed clamp via an ISO 13628-8 class IV torque tool.All products listed below are subject to third party verification and…

Moon Pool Systems

Multi Purpose Handling Systems (MPHS) have been developed for use with a wide variety of subsea tools, they are designed, constructed and tested according to DNV's Standard For Certification Of Lifting Appliances No 2.22 October 2008

The MPHS can be designed and manufactured units for lifting 10, 25, 35, and 60Te with design integrity up to 80Te. It sits over the moonpool of the vessel and lowers tools subsea on a main-lift winch.These systems enable a safe and cost effective solution to both module handling and Moonpool ROV handling.A complete skidding…

Launch & Recovery Systems

All LARS are designed, constructed and tested according to DNV's Standard For Certification Of Lifting Appliances No 2.22 October 2008. Over 100 A Frames have been delivered and the design and construction has evolved over 20 years of operational experience.

We have produced bespoke A-Frames alongside eight standard models for ROV handling:XWM-90 LARSXW-90 LARSXS-90 LARSHF-135 LARSHFM-135 LARSXT-90 LARSXX-90 LARSFT-90 LARSThese models are suitable for both deck ROV handling and hangar ROV handling of ROV's ranging from 5Te observation ROV systems to 25Te trencher systems, including a failsafe cursor system.A complete LARS that includes A Frame,…
Quick Contact Subsea Innovation



Quick Contact Subsea Innovation



Subsea Innovation complete testing on 10th pipeline repair clamp in 9 months

Subsea Innovation, one of the world’s leading subsea equipment suppliers, has announced that it has completed testing on their 10th...
1st August 2017

Cable Protection System Cutting Tool Proven and Available for Hire

Subsea Innovation Ltd has completed the design, supply and live demonstration of a Cable and Cable Protection System (CPS) cutting...
26th October 2016

Subsea Innovation and Tekmar Energy Cross Sectors and Join Forces

Subsea Innovation from the oil and gas industry collaborate on technology and cost reduction with Tekmar Energy, from the offshore...
20th September 2016

Subsea Innovation Successfully Delivers 16” Pipeline Connectors to RasGas in Qatar

Subsea Innovation, one of the world’s leading subsea equipment suppliers, is pleased to announce that it has completed the design...
17th May 2016

Quadruple accreditation standards for Subsea Innovation

Subsea Innovation, a world leading supplier of equipment for the offshore oil, gas and renewables sector are pleased to announce...
17th May 2016

Subsea Innovation Secures Seven-Figure Contracts with Oil and Gas Multinationals

Subsea Innovation, one of the world's leading subsea equipment suppliers, has secured a number of new multi-million pound contracts from...
28th August 2014

Subsea Innovation Ltd Starts Work on its new Headquarters

Subsea Innovation Limited, in Darlington, has officially started work on its new headquarters, which it hopes will secure larger contracts...
22nd January 2014
Quick Contact Subsea Innovation





Quick Contact Subsea Innovation



Quick Contact Subsea Innovation





Contact Subsea Innovation

Optional Data

Almost there, complete this form and hit the submit button to complete your registration.

Confirmation

Finally, complete a quick security check and confirm terms and conditions:

Quick Contact Subsea Innovation